Selection Guide For Cold Forge Manufacturing Companies

User Guide: How To Sharpen Wood Chipper Blades

How do you sharpen your wood chipper blades? Well, if you are new in the woodchipping industry, this guide is for you. We have put together some of the basic tips for proper sharpening of the wood chipper blades.

Before we go to that, it is important to mention that you need quality wood chipper blades to keep the sharpness for longer. So the supplier matters. If you are buying blades, click for info about one of the suppliers of wood chipper blades. Check out their range.

Here are the main steps for sharpening wood chipper blades:

STEP 1: Get Sharpening Tools

The first step should be assembling the sharpening tools. Depending on the kind of wood chipper blades you are using, you have a range of tools that you need. But some of the most common and must have tools includes: manual hand sander, disc sander, wet grinder, belt sander, angle grinder and bench mounted sander. With these tools, you are ready for work.

STEP 2 – Clean the Blades

The second step is cleaning the wood chipper blades. You can start with water and soap, but for a thorough cleaning, you need sandpaper or a grinding wheel with very fine grit to remove the sticky debris and parts on the teeth

STEP 3 – Sharpen The Blades

With the cleaning and sanding of the blades, you can start with the sharpening process. There are several things that you need to get right. First, you need to maintain the blades’ factory cutting angle. In most cases, the angle can anywhere from 30 to 45 degrees. Remove the material slowly and avoid going below the blade height.

STEP 4 – Remove Burr From Back Of The Blades

With sharpening already done, you need now to remove the burr from the tips of the wood chipper blades. The burr is a by-product of sharpening, and for the blades to cut effectively, you need to remove it for the teeth to cut effectively.

STEP 5 – Balance The Blades

With the blades sharpened, you can now place them back to the chipper and ensure that they are properly balanced. This is important because poorly balanced blades will be inefficient to cut and could cause low-quality chipping. With that, your wood chipper blades will be ready for work. That’s how you can sharpen your blades, even at home.